Sentence examples for high absorption rate from inspiring English sources

However, the high absorption rate results in the need for over-correction of the defect and repeat procedures.

Experimentally, a high absorption rate is achieved: as high as 7·10−3 kg s−1 m−2.

A significantly high absorption rate (6 × 10−3 kg/m2s at a pressure potential of 700 Pa) is achieved in comparison with the conventional absorption systems.

However, due to the high absorption rate of fat grafts, a number of studies have examined the use of different agents to increase the viability of such grafts.

The major finding of the study was that the widely used form of phosphorus in excipient was calcium hydrogen phosphate (77.57%), which has been reported to be exhibiting a lower bioavailability (90 70%) compared with sodium hydrogen phosphate that has a high absorption rate (100%)36,41.

The amino acid salt potassium taurate has potential for use as a high-temperature absorbent for post-combustion CO2 capture, because of its low volatility and high absorption rate.

In this manner the activating additives can be localised to those parts of the absorption column where the high absorption rates achieved are truly beneficial and excluded elsewhere.

Problems of the measurement and evaluation of physically sound kLa data at high absorption rates in the non-coalescent gas liquid dispersions are discussed and some consequences of the application of the defective kLa are shown.

In contrast, a complex dependence on the radiation absorption rate must be taken into account, as very different radiation conditions may coexist inside the photoreactor, with high absorption rates in the region near to the radiation entrance window and much lower values on the opposite side of the photoreactor.

Therefore to design a compact and efficient plate-and-frame membrane absorber with water as a refrigerant, an optimum value of 0.5 mm for the solution channel thickness is suggested and a solution inlet velocity of about 0.005 m/s is recommended to achieve high absorption rates with acceptable pressure drop along the solution channel.

While catalytic walls help in sustaining gas phase reactions in very small channels by reducing heat losses to the walls owing to exothermic surface reactions, they also inhibit homogeneous reactions by extracting radicals due to typically high absorption rates of such species at the walls.