This mechanical treatment is primarily controlled by monitoring Almen (peening) intensity, which corresponds to the arc height at saturation of standardized test strips exposed to the shot stream.
Thus, the frequency growth causes an increase of hop probability over the barriers, the heights of whose are distributed by the Gauss function, which explains the smooth curve growth progress a sharp increase (area corresponded to the vicinity of mode value of the barrier height)—a saturation.
Saturation height model from MICP showed a good oil saturation which is consistent with the sigma-based saturation.
According to Corey Brooks function, the saturation height function can be obtained by combining the height above the free water level, the reservoir depth and the pore throat size.
It is also found that the progressive liquefaction process is significantly affected by wave height, permeability and saturation of seabed soil.
Main electrical parameters; such as ideality factor, barrier height and reverse saturation current, are calculated using Thermionic Emission and Norde's method, and it was found that they show dependence on UV illumination.
4. By using the saturation height function, a three-dimensional water saturation model can be obtained.
For a reservoir, the water saturation height functions are quite various.
The saturation height function can be used in the numerical simulation model directly.
Track 7: saturation height model based on MICP data input compared with saturation from Dean Stark (especially for Well-7).
