Your English writing platform
Discover LudwigSuggestions(1)
Exact(5)
The height of the interface and the water hold up increased with DRP.
A solution to the KPZ equation would provide, for any time t and any point along the bottom edge of the glass, the height of the interface above that point.
By fitting the calculated results to the observed ones, lateral size and height of the interface roughness of the (4 1 1)A sample were determined to be 3.5 and 0.23 nm, respectively, which are 30%and50%0% smaller than the corresponding values (Λ=5.0 nm and Δ=0.43 nm) of the (1 0 0) sample.
Finally, a steady-state compression settling takes place with a much smaller rate of decrease in the height of the interface between the sludge and the supernatant.
These initial value problems are characterized by the initial slope of the interface based on the assumed θp and the contact height of the interface at the particle (0 ≤ hp ≤ D), where D is the particle diameter.
Similar(55)
It has been adopted to predict the height of the thermal interface which is one of the indicators of fire safety level of the fire compartment.
The reflection of visible laser light at the interface was used to check regularly the height alignment of the interface with respect to the neutron beam.
High thickness accuracy was achieved when the pulling process was carried out under thermally stable conditions, under which the effects of the thermal non-uniformity were canceled out by those of a change in height of the solid liquid interface.
The function of the concave height of the solid liquid interface is given as a function of the temperature gradient, the crystal growth velocity, the diameter of the crystals and the thermal physical parameters.
It was found that by increasing the temperature gradient, the crystal growth velocity, and the zone-melting length, the concave height of the solid liquid interface could be reduced.
The above approximation of is valid when, where is the height of the growth interface above the shaper top.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com