Your English writing platform
Discover LudwigExact(2)
Height changed from the 50th percentile to the 25th percentile between the first and the second year under treatment.
Percentage error increased from 1.1%to11.3%3% in absorption coefficient and from 2.4%to4.2%2% in the reduced scattering coefficient when height changed from h = 0 mm to h = −3 mm.
Similar(58)
It is observed that the factor of safety in sliding mode of failure decreases by about 70% when the ratio of tsunami water height to initial water height is changed from 0.375 to 1.125.
InSAR height change from SRTM 2000 to TanDEM-X 2011 (m).
In Tanzania, AGB change was predicted based on InSAR height change from TanDEM-X and SRTM DEMs with an accuracy of 67.2 Mg ha−1 (51%; [84]).
In addition, the 11 year InSAR height changes from SRTM in 2000 to Tandem-X in 2011 could be used for the business-as-usual reference levels.
Figure 2 Predicted AGB changes for 200 m 2 plots based on InSAR height changes from the SRTM C-band DSM and a Tandem-X DSM, and the model AGB = 14.9IH, where IH is InSAR height above ground.
In this study, we estimate meridional neutral wind during nighttime in a magnetic meridional plane by taking the double difference of the ionospheric height change from a no-wind reference at conjugate points.
Figure 3 Predicted AGB change (t/ha) over the study area based on height changes from C-band SRTM to Tandem-X and the model AGB = 14.9IH (left), based on SRTM X-band (middle), and based on repeated ALS acquisitions (right).
During the processing we used a multi-looking of 5 azimuth x 5 range, which corresponded to about 10 m x 10 m, which was also the spatial resolution of the geocoded DSMs obtained by bilinear interpolation (Figure 5). Figure 5 Processing from interferogram (left) into DSM (middle) and height change from SRTM C-band to Tandem-X (right).
It is likely that Aβ(1 40) and Aβ(1 42) do not form the same type of high molecular weight oligomers and the growth of Aβ(1 40) oligomers might be restricted to the lateral dimension, without causing height changes from monomers to oligomers.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com