The phrase "heater element" is a correct and usable part of written English.
It could be used in a sentence like this: "The heater element was blocked by dirt, leading to the appliance malfunctioning."
The measurement principle is based on the forced convective heat transfer from a heater element.
The temperature of the heater element is kept constant at about 120 °C with fluctuations within 8 °C.
The chosen fabrication process allows the shape of the polysilicon heater element to deviate from the actual actuator geometry.
The probe, without the heater element, will be a 21.4 mm diameter by 50 mm long cylinder.
Influence of heat flux, coolant flow rate, and inlet temperature on the temperature of the heater element are investigated.
An integrated heater element over the porous layer provides the effective heating and the low power consumption of the device.
Fibre metal laminates with integrated heater elements have a promising potential as de- or anti-icing systems in aircraft structures.
Analytical expressions are obtained for various temperatures of the air heater elements as well as for the temperature of the storage material.
The alternating metal and composite lay-up in fibre metal laminates seems ideal for the development of a multifunctional skin with embedded heater elements.
A new NO abatement strategy proposes the use of the Ljungstroem air heater of the power plant as a chemical reactor, covering the air heater elements with a catalyst.
To provide thermal isolation, we designed and fabricated two sets of insulation cavities for the heater elements, one to reduce the heat transferring from the heater elements to the substrate and the other one to reduce that of heat to the wiring.
