Sentence examples for heat temperature from inspiring English sources

wow..... lots of confusion here about heat, temperature and heat transfer.

The control factors of converting process are heat temperature, pressure and time.

Moreover, AFM investigations also showed that the average roughness of the coated films increased with the rising heat temperature.

The larger specimens with higher weight require higher heat temperature and longer duration for the geopolymerization development.

The optimum heat temperature and duration for the optimum ingredient are 75 °C and 72 h, respectively.

The higher heat temperature of 85 °C causes the loss of moisture, which results in micro-cracks and strength reduction.

Record summer heat temperatures around the globe.

Micro-strainand dislocation density were enhanced using high Ar flow rate and low pre-heat temperature.

The %Te of the thin film tended to increase with an increase in both the Ar flow rate and the pre-heat temperature.

However, the expected condition to obtain highest power factor was the highest Ar gas flow rate and the lowest pre-heat temperature.

Results indicate that increasing the initial temperature of the reactants results in dramatically increased flame speeds for nanocomposite thermite (i.e., from 627 to 1002 m/s for ambient and 105 °C pre-heat temperature, respectively) and for micron composite thermite (i.e., from 205 to 347 m/s for ambient and 170 °C pre-heat temperature, respectively) samples.