Sentence examples for heat processing time from inspiring English sources

The moisture content decreased with increased surface color, due to more moisture loss with longer heat processing time.

When UV-H treatments were applied at 53°C, 4.5 and 93.5 minutes of the UV-C and heat treatments would be required, respectively, that is, a 20-fold time reduction of the heat processing time.

Therefore, we believe that the experimental conditions (heat treatment temperature, heating rate, and/or processing time) employed in the synthesis methods to obtain the HfO2 (film or powder) are able to promote the formation of particles with several morphologies and different sizes, probably inducing residual stresses, and/or distortions into the lattice [57].

The attractive merits of the infrared heating in these applications include high heat delivery rate, no need for heating medium, reduced processing time, improved energy efficiency, and enhanced product quality and safety without significant negative environmental footprint.

In many applications, the use of microwave heating as an attractive alternative to conventional method of heating has shown to be more energy efficient, because it provides selective, fast and homogenous heating, which reduces processing time and costs significantly [11, 12].

Much shorter processing time and lower heating temperature are required by the microwave heating method than the conventional heating method for preparation of both sorbents prepared in this work.

In-situ heating by induction could significantly reduce processing time and energy consumption during consolidation of carbon fibre composites, but to control the induction heating process properly the electrical conductivity of the fabric must be known.

It is recommended that the ohmic heating method could be successfully integrated to vacuum evaporation process to shorten the processing time significantly.

The chip uses a 2 mm channel width and 0.15 mm depth to reduce processing time, mitigate Joule heating, and achieve high extraction efficiency.

The effects of laser power and processing time on the resultant heated affected zone (HAZ) and the melted zone were investigated.

Consider applying heat with a blow dryer to speed up processing time.