Sentence examples for heat feed from inspiring English sources

In the feed system, two modules of heaters (HEATER) have been adopted to represent tubular furnaces that heat feed oil and water.

Far from the leading edge, where the heat feed back is low, NS solutions also over-predict the data due to transient effects caused by in-depth pyrolysis.

A solar-hybrid coal-fired power plant can use solar heat at <300 °C to replace steam extracted from a turbine to heat feed water.

In the SHR-PSD process, two compressors are used to improve the energy levels of two overhead streams so that the heat of the streams discharged from the compressors can be used to heat reboilers for both columns, and the sensible heat can be used to heat feed streams.

That's because, as the material overheats, the cobalt oxide readily gives up oxygen, which reacts with the solvent in the battery's electrolyte and generates more heat, feeding the reactions.

The modifications applied are the reflux ratio, feed plate location, and heating feed 1 of column 1.

Heat exchangers play an important role in supercritical water coal gasification systems for heating feed and cooling products.

The Dresdner Method [2] was suggested to estimate the power loss coefficient based on the medium district heating feed temperature of a time period.

This characteristic line is influenced by various design parameters of the CHP plant as well as operation conditions, like for example the district heating feed or return flow temperature.

The following key figures of a plant are sufficient to describe the plant characteristics: the maximum and minimum electrical load without heat extraction ((P_{text{woDH}})), the electrical efficiency for minimum and maximum load without heat extraction ((eta _{text{el}})), the district heating feed and return temperature ((T_{text{FF}}, T_{text{RF}})).

Combined cycle power plant with triple pressure boiler The flow sheet of the CCPP model with triple pressure boiler is shown in Fig. 7. Figure 8 shows the effect of the district heating feed flow temperature ((T_{text{FF}})) on the possible operating conditions and compares the simulation results with the generic modeling approach.