The inhibitor possessed a good performance in Solution 1 after 60 °C/24 h and then 70 °C/24 h heating at the dosage of 30 ppm.
The ATSE experiments were conducted according to the schematic diagram shown in Figure 1, and two major factors of NaOH dosage and heat preservation time were investigated.
All in vivo hyperthermia experiments, the experimental workflow, determination of temperature dosage and heat distribution and data analysis were carried out as described before in detail [ 28].
The main parameters of experiments were selected as the percentage of fly ash, heating degree, and cement dosage.
The effects of curing condition (moist-cured versus heat-cured), sodium oxide dosage, silica dosage, silica modulus (relative dosage of silica to sodium), solution/binder ratio, and free water/binder ratio on the compressive strength of sodium silicate-activated fly ash and slag cement concrete are evaluated.
In order to reach the highest bond strength values, the following factors should be considered: high values of surface macro-texture, low temperatures, the use of heat-adhesive emulsion, a dosage from 300 to 450 g/m2 of residual bitumen and the compaction after emulsion break.
On account of the fact that less reaction time usually means less energy consumption or more eco-friendly design, the M-H reaction time was successfully reduced to only 40 min by utilizing full microwave heating power and appropriate dosage of urea.
It allows him to control his dosage precisely, adjusting the heat level depending on the quality of his herb to make sure he's not pounding too much or too little at a time.
In both instances, lincRNAs from both species are seen to participate in chromatin remodeling, through dosage compensation or the heat shock response but otherwise exhibit little else in common.
Tocopherol loss can be explained by careless conditions during deodorization (such as high temperature, heating time, pressure, and stripping steam dosage) [ 30].
