Sentence examples for heat absorption rate from inspiring English sources

EG with porous structure can create the primary thermal conductive network for PCM to increase the heat absorption rate.

The heat absorption rate per unit of ground surface area occupied by the GHX is shown to be 18 times greater than a single-pipe horizontal heat-exchanger.

On the other hand, the thermal conductivity of the composite matrix acts sharply to increase or decrease its heat absorption rate.

The boiler-side heat absorption models, which cover the heat exchangers, the metal wall and the heat losses are established to calculate the heat absorption rate of the working fluid in the boiler.

The heat absorption rate of AT (W).

The heat absorption rate of MT (W).

A corresponding numerical model is developed showing that optimizing the solar heat flux absorption rate of the absorbing layer in regard of the necessary heating, cooling and lighting needs helps reducing significantly the total yearly energy consumption, and cooling peak loads.

L/Q decreased according to increasing U-tube separation distance and decreasing underground circulating water flow rate, because the thermal interference effect of underground circulating water and heat absorption and emission rate from the ground decreased.

It is also seen that the generated heat and specific absorption rate of nanoparticles increase with increasing of the nanoparticle size such that for the W4 sample with a mean size of 5.5 nm, a temperature rise of 23 K was obtained compared with that of the W3, W2, and W1 samples (11, 4, and 2.5 K) (Table 4).

Therefore, the selection of MNP exhibiting a sufficient heating capacity (specific absorption rate, SAR) to achieve satisfactory temperatures in vivo is necessary.

For the NH3/H2O nanofluids, the heat transfer rate and absorption rate with 0.02 vol% Al2O3 nanoparticles were found to be 29% and 18% higher than those without nanoparticles, respectively.