When cavitation occurs in pumps, it has the potential to cause performance degradation, namely, loss of head, capacity, and efficiency and permanent damage due to erosion and mechanical failure of pump components and structures.
Speaking to the Associated Press, Vice President of Facilities Dave Duernberger reveals that 195 tons of food waste were generated at the 82,566-head capacity stadium in 2013 — a decent increase from the 153 tons the previous year.
He's displayed not only a murderous impulse but also a clear-headed capacity to cover up his crime.
The results were compared to code prescriptions, and a proposition to modify an existing design equation for the ultimate shear capacity of headed studs in composite precast hollow-core slab beams is presented, focusing on the influence of the structural concrete topping.
For full shear connection design, pre-splitting shear capacity of the headed stud can be used for the composite design, while for partial shear connection design, post-splitting shear capacity of the headed stud should be used.
A binge of borrowing and expansion left them with a surfeit of capacity heading into the recession of 2001-2, and their stocks tanked.
The unbeaten run was still alive but Real were not satisfied with the draw – least of all Ramos, who again demonstrated his astonishing heading ability and capacity to save his team's skin.
Updated at 9.59am BST 9.58am BST Brooks Newmark MP homes in on one worry -- that Britain, with its fast-growing economy, could be heading for a capacity squeeze if there is less slack in the labour market than expected.
Both HT and HS genotypes exhibited head-forming capacity at 15 °C, but only the HT genotype showed head-forming capacity at 22 °C and 27 °C at 130 DPG (Fig. 1a).
Design equations presented in this chapter for estimating the shear capacity of the headed shear stud show a good correlation with the push-off test results.
To scrutinize the relationship of genotypic differences and head-forming capacity at high temperature, we obtained the other heat-tolerant 'AVS1′ line (HT1) to test the head-forming capacity at 22 °C at 130 DPG.
