However, it is observed that when two materials have the same peak strength, the heterogeneous model has more released energy than the homogeneous model due to the difference in the failure mode.
The preconjugates and NH2OH control particles had the same peak, verifying that the conjugation protocol does not alter the absorbance peak.
Both tunneling pulses have the same peak value and time back edge, and the peak value is 2/3 times that of the pump pulse in step I.
For each comparison, the SAE is designed to have the same peak side lobe, number of sensors, or aperture as appropriate for that comparison.
The measured photoluminescent and triboluminescent emission spectra for EuD4TEA are shown in Figure 4. Notice that both emission peaks have the same peak wavelengths but differ in intensity yield.
As in Figure 8, the annealed spectra have been renormalized so that they have the same peak intensity while the AD spectrum has been renormalized so that it maintained its relative intensity with the 2 s anneal.
In this figure, the annealed PL spectra were renormalized to have the same peak height to aid in comparing changes in emission energies while the AD spectra was renormalized to maintain its relative intensity compared to the 2 s anneal.
Constraining the ECSA and SAE to have the same peak side lobe leads to an SAE with slightly more sensors than the ECSA for uniform, Hann, and Dolph-Chebyshev shading as shown in Figure 17.
Lapidoth and Shamai [32] performed a detailed study of this communication problem and showed in particular that the capacity region when all users have the same peak power constraint is given as the closed convex hull of the union of aspiration sets of certain games, just as in the case of the DM-MAC.
It had the same peak horsepower, but at 9,000 rpm instead of 10,000, and more torque, 0.53 kgm at 7,000 rpm instead of 0.48 kgm at 8,000 rpm.
