Sentence examples for has slight influences from inspiring English sources

However, δ is as large as 10%, which is caused by the RIE process, because δ of 430 nm PS nanospheres is only about 3% and KOH etching process has slight influences [16].

The results show that the critical thickness increases with decreases in the thickness of the thin crystal substrate and the elastic constant of the insulator, while Poisson's ratio has slight influences on the critical thickness.

Uf has a significant influence on the SOFC electrical efficiency, while it has slight influence on system electrical efficiency.

The initial texture changes significantly with increasing strain, the strain rate has slight influence on the texture evolution.

It is found that the gas pressure in the capillary (initial Pinner) is the most important factor for the solution impregnation although the capillary force has slight influence on the capillary rise.

The result shows that while there is seam between the track slab and the CA mortar layer, it has slight influence on the smooth of vehicle operation, but has significant impact on the mechanical properties of the CRTSII slab ballast-less track structure.

During peak traffic time, what is important is that this result indicates that the sufficient resource for UEs benefiting from the densification of active PBSs provides more time for some PBSs to be switched off, while has slight influence on the blocking probability.

The inlet temperatures and flow rates of the HTF significantly influenced the time-durations of the discharging process, while the initial temperature of the system had slight influence.

The absorption spectra indicated that the short conjugated side chains have slight influence on the UV-region spectra of PPVs; whereas with increasing the length of conjugated side chains, the absorption of the UV-region red-shifted.

The results indicated that design for disassembly is necessary to harvest valuable inventories from every product disposition options except of disposal whereas design for environment and commitment of resources have slight influence on repair and disposal activities.

The result indicated that the start condensation time of 1.0gpm leak was about 75min and 45min of 1.5gpm, and the leak location had slight influence on the start condensation time.