Sentence examples for hardness is lower from inspiring English sources

The hydrogenated DLC coating with saturated ‐CH bonds showed better wear resistance even though its hardness is lower.

Benefiting from the formation of low shear strength transferred layers which mainly consists of CaF2 solid-lubricating phase, the PTA clad TiC/CaF2/γ-Ni coating presents higher wear resistance and lower friction coefficient compared with the PTA clad TiC/γ-Ni coating, although its hardness is lower than that of the PTA clad TiC/γ-Ni coating.

Nickel can make the tungsten carbide magnetic and adds corrosion-resistant properties to the cemented tungsten carbide parts, although the hardness is lower than those of parts made with cobalt binder.

The wear test results revealed that wear rate of all the coatings increased with increasing load and that the blend coatings showed better wear resistance than the pure molybdenum coating, although the hardness was lower.

The hardness was lowered by increasing the distance of the peak position of nitrogen concentration from the implantation surface.

However, the hardness of Al is lower than that of the steel mainly used for these machine parts at present.

Hardness of n WC Co is lower than that of m WC Co since the degree of hard WC decomposition to less hard W2C, W and graphite is larger due to the larger specific surface area.

Both compounds are in the amorphous state and their hardness is much lower than that of the crystalline compounds, which require an annealing process after ion implantation.

The elastic modulus (G' or gel hardness) of ∼160 Pa is lower than that of other fillers; 1 this provides a smoother and softer gel that is easy to inject, and that is ideal for spreading and molding in the lips.

The calculated results of Fig. 7 show that the global hardness of the AIV model is lower than those of other models and therefore this model is more reactive than the other models.

The effects of heat treatment temperature and time on the hardness and the wear resistance of RE (rare earth -Ni-W-P-PTFE-SiC and Rearth -Ni-W-P-PTFE-SiC coatings havearth -Ni-W-P-PTFE-SiCearth -Ni-W-P-PTFE-SiCt thearth -Ni-W-P-PTFE-SiCositearth -Ni-W-P-PTFE-SiCd the mand loss (i.e., rate of abrasion) is higheRE-Ni-W-P-SiCeposited state.