Sentence examples for hardness bond from inspiring English sources

The interface layers are responsible for hardness, bond strength, thermal stability and adhesive strength of the whole GDS structure.

In addition, Young's Modulus (E), and Poisson's Ratio for LiFeSO4F, NaFeSO4F and 50% metal-doped AFe1-xMxSO4F (A = Li, Na; M = Co, Ni, Mg) are also presented to explore the hardness, bond characteristic and stability against shear.

For the example of copper, the present investigation directly compares the different microstructures and properties of coatings like hardness, bond strength or electrical conductivity obtained by cold spraying and thermal spraying.

The nanostructured Al2O3 13 wt.%TiO2 coatings possessed higher hardness, bonding strength and crack growth resistance than conventional Metco 130 coatings which were mainly composed of lamellar fused structures.

The quality of coatings, films and layers is usually assessed by measuring their porosity, chemical composition, homogeneity, macro- and micro-hardness, bond strength and surface roughness.

Microstructural and mechanical characterization of the coatings was carried out by SEM, XRD, micro-hardness, bond strength and wear resistance tests.

The phase composition, microstructure, micro-hardness, bonding strength and in vitro cellular responses of the composite coatings and the functionally graded composite coating were studied.

Differences in the composition of composite resins can to influence in the Knoop hardness and bond strength of restorations.

The microstructure, porosity, roughness, Vickers hardness and bond strength (ASTM C633) of these coatings were analyzed and evaluated.

Therefore, the aim of this study was to evaluate the Knoop hardness and bond strength between tooth/restoration of conventional methacrylate- and silorane-based composites.

The results of the microhardness test and Raman spectroscopy revealed that the films showed abrupt changes in their hardness and bonding characteristics when the rf bias voltage was >−40 V.