Sentence examples for hardening level from inspiring English sources

We assumed the long term driving to be two hours, quantified the hardening level to an amount of sagging, and evaluated three types of low density polyurethane foams with different material characteristics.

From the engineering point of view, the manufacturing process by cold drawing improves the fatigue behaviour of the steels, since the fatigue crack growth rate decreases as the strain hardening level in the material increases.

The endothermic enthalpy relaxation peak, characteristic of aged glasses, could be erased at temperatures well below Tg by large mechanical deformations, i.e. close to the incipient strain hardening level in uniaxial compression tests.

The nano-indentation hardness results showed that both single-(He+) and sequential-(He+ plus H+ subsequently) irradiated steel exhibited obvious hardening and the hardening level of single-(He+) was higher than that of sequential-(He+ plus H+ subsequently) one.

An approximate quantitative method to determine maximum strain hardening levels under non-proportional low-cycle strain-controlled loading is proposed.

The study reveals that alternative credit scheme systems can dramatically increase the overall hardening levels such that 50% of the building population will voluntarily be retrofitted.

For the macrolevel, on the basis of analysis of the mechanical properties of metallic materials, the authors have derived a correlation dependence between the hardening levels under static and cyclic loading.

Rectangular specimens, obtained from cold-rolled plates and having different hardening levels, are analysed and the residual stress evolution, due to three-point bending load application, is evaluated with respect to the initial value.

Also, the indentation hardness is seen to increase with the Young's modulus and strain-hardening level of the indented material for both conical and spherical indentations.

When the indentation depth is small such that little or no plastic deformation is induced by the spherical indenter, the hardness appears to be independent of the strain-hardening level.

The sample numerical results obtained using the two newly developed models reveal that the indentation hardness increases with the Young's modulus and strain-hardening level of the indented material.