Sentence examples similar to hardened pins from inspiring English sources

Piston pin supports (bosses) are cast in opposite sides of the piston and hardened steel pins fitted into these bosses pass through the upper end of the connecting rod.

The impact treatment in LN2 was observed to be accompanied by material transfer from the hardened steel pin to the alloy followed by incorporation of the pin components into Ti6Al4V and formation of the FeN, FeC and TiC bonds.

If you are unsure if the lock is made with a hardened center pin, consult a local hardware store or locksmith and give them as much information as you have on the lock.

Some tubular locks have a center pin made of hardened steel, while others have a ball bearing in the middle pin to prevent drilling.

Sliding tests were performed in the pin-on-disk configuration against a hardened tool steel (55-60 HRC) disk.

Identical large droplets of hardened wax balance on the ends of ley-pins.

That means stronger sea walls, natural barriers, hardened power grids, hardened water systems, hardened fuel supplies".

Coatings were deposited on hardened 100Cr6‐bearing steel discs and tested against uncoated steel balls in pin-on-disc contact configuration under dry reciprocating and unidirectional sliding in helium atmosphere.

Contrary to the expectation of that the hardened adhesive previously filled into the holes during adhesion would create a pin effect in load bearing, holey specimens exhibited poor performance and induced degradation in joint quality.

The wear tests are performed on a pin-on-disc tribometer in which the irradiated samples are rubbed against a hardened Cr12MoV high alloy steel disc (HRC 62 63) under a normal load of 18 N using machine oil as the lubricant media.

The wear tests were performed on a pin-on-disc tribometer in which the γN-phase samples were rubbed against a hardened Cr12MoV high-alloy steel disc (HRC 62 63) under a normal load from 2.2 to 39 N using Cr2O3 powders in machine oil as the abrasive media.