Sentence examples for hardened conditions from inspiring English sources

A sum of 12 different mixtures with 630 kg/m3 binder were prepared to observe SCMs behaviour in fresh and hardened conditions.

A total of 182 samples of 40 × 40 × 160 mm mortar were prepared and cured in water at 3, 28, 56 and 180 days and immersed in sea water and magnesium sulfate (MgSO4) solution at 28, 56, 90 and 180 days to observe SCMs behavior in hardened conditions.

A model based on inelastic column theory incorporating strain hardening was able to predict the lattice truss core's compressive peak strength capacity in both the annealed and age hardened conditions, for all relative densities tested.

Tempering weld alloy steels lead to a decrease in toughness as compared with the hardened condition.

Also the comparison of strength of components made out of steel 1.5525 in quenched and tempered conditions and steel 1.3815 in strain hardened condition is done.

However, these models do not adequately describe the material behavior in hard machining, where the workpiece material is machined in its hardened condition.

Physical properties such as thermal conductivity, dry unit weight, porosity and capillarity; mechanical properties such as compressive and splitting tensile strength, modulus of elasticity and abrasion resistance were determined in hardened condition.

This paper presents an estimation of the local durability based on the highly stressed volume approach by simply determinable static material properties including also sinter-hardened conditions.

Another interesting conclusion from this comparison was that the volume percentage of silicon carbide reinforcement did not influence the pattern of distribution of SiC under as-cast and solution-treated followed by age-hardened conditions of composites.

Alaneme and Aluko (2012) reported that the tensile strength and yield strength of SiC-reinforced Al 6063 composites increased with SiC content in both as-cast and age-hardened conditions (Figure 15), and ageing treatment improved its tensile strength (Figure 16).

The present study reports the effect of laser parameters on the microstructure, and consequently, the wear resistance of laser surface engineered (hardening and melting) AISI H13 tool steel (in hardened and tempered condition) substrate.