Sentence examples for half depth from inspiring English sources

Furthermore, a 10% restoration of the resolution uniformity is obtained using the half depth assumption and an 18% restoration using measured DOI.

This study presents a new laboratory reflectance spectroscopy method that characterizes soil spectra in terms of the positions, depths, asymmetries at half depth, and widths at half depth of the clay diagnostic absorption bands (1400 nm, 1900 nm, and 2200 nm).

For different point source radial positions along vertical and horizontal axes of a FOV transaxial plane we compare the results obtained by three methods: without DOI information, with the DOI provided by our system and with the assumption that all the γ-rays interact at half depth of the crystal thickness.

The values obtained in the lateral scan comparing the maximum collected signal on each side are not symmetric with respect to the half depth of the detector (i.e. the values shown in Fig. 8-right are confined in the asymmetric range [−0.8, 0.6]), conversely to the distribution of the calibration values used for the method of the cluster size asymmetry that is ranging in approximately [−0.4, 0.4].

The half depth (HD) of a point x in R d with respect to a probability measure P on R d is defined as the minimum probability mass carried by any closed half space containing x; that is, (1) HD (x, P ) = inf ⁡ { P (H ) :    H     is     a     closed     half     space,     x ∈ H },                                           x ∈ R d.

Source-half depth distance (SHD) was initially calculated to obtain a constant dose rate of 0.5 Gy min−1 and monthly adapted from the Co source radioactivity decrease.

The company says its "patented half-depth, back-to-back chassis design" offers about twice the density of traditional rack-mounted equipment.

The eBW (iBW) was measured from the smoothed curve as the width (Hz) at half-height (half-depth) around the eBF (iBF).

The resulting temporal tuning curve was convolved with a 5-point symmetric Hanning window, and the etBW (itBW) was measured from the smoothed curve as the width (ms) at half-height (half-depth) around the peak.

and had a half-depth of 2.55 ± 0.2 μm and a width of 31 ± 2 μm.

The cross-shaped microchannels had a half-depth of 2.52 ± 0.2 μm and a width of 42 ± 2 μm.