Sentence examples for half area from inspiring English sources

ELISA plates (half area 96 well, flat bottom) were purchased from Greiner Bio-One, Frickenhausen, Germany.

The left half area of each sample has sealed with epoxy.

At the same time, the 71.3% of isolated EpCAM positive CTCs were isolated at the first half area whereas the 76.9% of EpCAM negative CTCs were collected at the latter half area.

To evaluate the correlation between the superior or inferior half area of parapapillary atrophy (PPA) and the corresponding hemifield visual field damage (VFD) in normal-tension glaucoma.

The first acquisition started in November, 2011, when Coal 1−2 of 12,407 working face hadn't been mined and the coal seam was in original state, and the acquisition was background survey for strata; the second acquisition was carried out 4 months later, when nearly half of Coal 1−2 of 12,407 working face had been mined, and half area of the working face was goaf and the other maintained unmined.

The typical value of f is in the order of 0.1 (Aschwanden et al. 2014), the typical sunspot area for generating X10 class flares (approximately 1032 erg) observed in 1989 to 1997 was 3×10−4 of the half area of the solar surface (Sammis et al. 2000), and the typical magnetic field strength of the sunspot is in the order of 1,000 G (e.g., Antia et al. 2003).

Figure 2b, however, presents uniformly distributed particles covering more than half areas of the silicon surface and leaving appropriate gaps between particles.

Using a compact Canon S95 camera, Winters captured 187 photographs for the typographically-based project, all taken within the mile-and-a-half area between his home and work.

A one-half area from the transverse sections of the kidney was selected from each sample for the quantification of the percentage of the fibrotic area in the PASR images.

The proposed FMA has only half-area requirement in terms of on-chip memory buffers, adders/subtractors, and multiplier/shifter required as compared to HA.

A dilution series of the compound N-6 in potassium phosphate buffer (10 mmol/L, pH 7.50) was made on a 96-well polypropylene plate, which was subsequently transferred onto a 96-well, half-area UV-transparent quartz plate in duplicate, 50 μL/well.