Sentence examples for grit removal from inspiring English sources

It includes the physical processes of screening, comminution, grit removal, and sedimentation.

Type of grit removal is horizontal with surface velocity and tank floor velocity of 0.45 and 0.3 m/s, respectively.

The physical processes include flow equalization, mixing, dilution, deep well injection, ultraviolet radiation disinfection, fluoridation, gravity, solids separation-screening, grit removal, and settling-sedimentation-clarification.

The large O2 excess capacity for aerobic carbon removal also suggests primary suspended solid removal is unlikely needed, although grit removal remains necessary.

The proposed plant consists of influent pump station, preliminary treatment (screening, grit removal), sequencing batch reactor, equalization, filtration, chlorination, sludge flotation thickening, anaerobic digestion, belt-filter press, and hauling and land filing.

This plant consists of influent pump station, preliminary treatment (screening, grit removal), equalization, extended aeration activated sludge, secondary clarifier, chlorination, aerobic digestion, belt-filter press, and hauling and land filing.

The mechanism of material removal in grit blasting has been analyzed.

During grinding, only a small top region of the abrasive grits is efficient for metal removal, the remaining part is sliding and rubbing the workpiece material (Sin et al. 1979).

As shown from Fig. 4a, both 60# and 180# grit size abrasives have good metal removal ability.

Level average response analysis has indicated that a load of 1.5 N/ball, an abrasive concentration of 20%, and a speed of 400 rpm would give a high material removal rate using B4C (500 grit) abrasive.

A coarser grit size abrasive gives a higher metal removal ability, and lubrication significantly increases the metal removal rate.