Sentence examples for grade efficiency from inspiring English sources

The separation performances were determined from total separation efficiency and grade efficiency.

Uniflow hydrocyclones with cylindrical height L/D=2.15 can be used for classification because their grade efficiency curve is "S" shaped, while the other studied cylindrical heights can be used for high separation because their grade efficiency curves showed a high efficiency even for small particles.

By using the bipolar pre-charger, the grade efficiency can be significantly increased for all particle sizes due to the charge-induced particle agglomeration.

The smaller the angle change between the two cones, the larger the sharpness of the grade efficiency curve, i.e., the hydrocyclone is more suitable for the classification process.

For the fine particles ranging 1 200 μm, the grade efficiency was higher at the higher inflow rate (higher than 600 ml s−1) and higher underflow rate.

However, for the coarse particles ranging 400 700 μm, the grade efficiency was higher at the lower inflow rate (lower than 600 ml s−1) and higher underflow rate.

The overall and grade efficiencies have been obtained under both dry and wet conditions at varying inlet velocity at constant solid loading.

Within the research range, the simulation indicates that the liquid-solid separation mainly occurs in the conical segment, and increasing conical height or decreasing cylindrical height helps to improve the grade efficiencies of solid particles.

Finding peace where science-grade efficiency meets luxurious aesthetics?

In this paper the performance characteristics, expressed as cut-size, grade-efficiency curve and pressure drop, have been determined for a hydrocyclone acting on highly viscous liquids.

Grading efficiencies (GE) (Galen and Gambino, 1975; Collan, 1989; Collan and Pesonen, 1989; Collan et al, 1992, Kujari et al, 1994) were used to estimate consistencies with respect to the fraction of uniformly graded cases.