Sentence examples for glass sealing from inspiring English sources
During the cell test, anode and cathode sides of the cell were separated by Pyrex glass sealing.
Hermeticity is often a desired result in glass sealing.
Much of modern microelectronics involving thick-film technology also depends on glass sealing, although in this case hermeticity is not a requirement.
During the manufacturing and thermal cycles of advanced contemporary large sized sodium sulfur (NaS) batteries, thermally driven stresses can be applied to the glass sealing joints, which may result in catastrophic cell failure.
In the present study, the optimum coefficient of thermal expansion (CTE) of the glass sealant and end shape of the glass sealing area (i.e., concave, flat, and convex shapes) have been determined using the finite-element analysis (FEA) computation technique.
The results showed that the CTE value of 7.8 × 10−6 K−1 with a convex end shape would have the lowest stress concentration in the vicinity of glass sealing joints for the prototype tubular NaS cell design adopted in this work.
Case study results indicate that a reduction in heating requirements of about 50%, and therefore an equivalent carbon footprint reduction, can be achieved by replacing a single glass sealed cover with a double glass sealed cover.
A glass sealed working electrode (GSWE) was developed in order to set the exposed area of tungsten and reduce the error associated with WE area.
A 1∶1 mix of the two probes were denatured at 75°C for 4 minutes, quenched on ice then applied directly to the slide, covered with cover glass, sealed with rubber cement and hybridized for 16 hours at 37°C.
The hybridization of 4,608 spots is carried out under a 24 × 50 mm cover glass sealed tightly within a moistened hybridization chamber, GeneMachines HybChambers (Genomic Solutions, MI, USA), in a 65°C water bath from 12 to 16 h.
Briefly, respiration rates were determined by measuring CO2 production from individual flies maintained in a 2.2 ml glass sealed chamber flushed with CO2-free, water-saturated (100% RH) air.
