Sentence examples for glass density from inspiring English sources

The glass density was calculated from the relationship between glass density and H2O content42.

H2O and CO2 contents were calculated using the Lambert-Beer law using the measured absorption peak height or area, thickness of doubly polished thin sections, glass density, and the molar absorption coefficient.

After irradiation, the glass density increased and the SAXS intensity decreased, indicating a compositional homogenization process in the samples subject to a higher dose of irradiation.

The relation between a linear dissolution rate V (m/s) and a growth rate normalized to the surface R p (mol/m2/s) is: V=frac{M}{d}times {10}^{-6}times {R}_p (1 where M is the molar mass of the glass (g/mol) and d is the glass density (g/cm3).

When the saturation level was 0.87 cm3 · cm−3, the water content of the artificial macropore corresponded well with the theoretical pore volume estimated from the solid phase ratio (0.3 g · cm−1) and glass density (2.55 g · cm−3), which is 1 − (0.3/2.55) = 0.88 cm3 · cm−3.

Relative density the standard metric of sintering in ceramics and glass-technology studies is inversely proportional to the total porosity, and we observe that the preservation and accumulation of isolated porosity prevent the recovery of the defect-free glass density.

A small ground-glass density in the lung was compatible with viral pneumonitis.

Mono-component beds contained 1.85 mm glass beads (density 2500 kg/m3) or 0.550 mm ceramic spheres (density 3800 kg/m3800

The results suggest that a high content of Gd2O3 is of significance for designing dense glass with density of 6.0 g/cm3.

The cold crystallization of poly ethylene terephthalate) (PET) has been studied as a function of the initial structure of the glass using density, microhardness, wide angle X-ray scattering, small angle X-ray scattering and DSC measurements.

For example a lightweight ECC mix containing a slightly larger size glass bubble (density 0.38 g/cm3; size distribution 10 80 μm with mean value of 40 μm) at a weight ratio to cement of 50%% drove the ECC composite density down to 0.93 g/cm3, below the density of water.