And who cares whether a given specimen belongs in this phylum or that?
Density measurements for a given specimen involve the determination of any two of the following quantities: pore volume, bulk volume, or grain volume, along with the weight.
Since then, many of those issues have been analyzed to the extent that numismatists can determine at what stage of a die's lifetime a given specimen was produced.
HA sizes within a given specimen varied by a factor of two to three in most cases and from specimen-to-specimen (patient-to-patient) by roughly 50%.
These modes of failure include TGO bondcoat interface, intra-TGO, and TGO TBC interface failure for a given specimen.
For a given specimen of size L, the hysteresis decreases rapidly at either very large or small values of l.
Existing commercial microscopes behave very much like their traditional counterparts, where a user controls the microscope and chooses the areas of interest manually on a given specimen scan.
This conclusion is deduced from the assumption that for a given specimen, the residual strength decreases monotonously as the fatigue life increases.
It was found that for a given specimen configuration, by increasing the projectile incident velocity up to its V50, the maximum contact force increased.
In practice, the name of the end-member that makes up the largest percentage of any given specimen is usually applied e.g., a garnet with the composition Al45Py25Sp15Gr9An6 would be called almandine.
The final geometries of the coated APT specimens were characterized with high-resolution scanning electron microscopy and transmission electron microscopy, and an empirical model was proposed to determine the optimal coating thickness for a given specimen size.
