Sentence examples for geometrical constants from inspiring English sources

In the following, we present some properties concerning geometrical constants of Banach spaces which also imply the property (D).

In this paper we present some other properties concerning geometrical constants of Banach spaces which also imply the (DL -condition or property (DL -condition

Where thickness ratio was between 1.25 and 2, a cross bore to main bore radius ratio of 0.075 was found to be a geometrical constant with a corresponding SCF of 2.65.

The increase is made possible by a design approach that focuses on displacements rather than stresses and the utilization of a spring mass system related parameter called the "geometrical constant".

First, the arc in the high-frequency range is constant and independent of the applied bias, implying that it does not depend on the Fermi level position and can be ascribed to the parallel association of the geometrical capacitance constant phase element (CPE 1 and the charge transfer resistance R 1 at the ZnO-ITO interfaces [23,40,50].

This is indeed observed in Figure 5a, where the diffraction patterns of resonant BE antennas are displayed for different values of a under parallel and perpendicular incident polarizations, keeping all geometrical parameters constant.

Keeping the other geometrical parameters constant (a = P and n = 8), the comparison can be systematically extended to other values of P. The evolution of the peak positions extracted from the diffraction patterns measured for parallel polarization is also remarkably simple.

The principal factors affecting the decomposer's thermal design are categorized into four groups: rate constants, geometrical parameters, heat transfer parameters, and operating conditions.

In these calculations, t/D = 0.6 and θ = 25° are used to guarantee a constant geometrical morphology.

High ordering and constant geometrical parameters (pitch, diameter) were easily achieved in the case of both EBL and FIB.

The columns with spatial variation of flexural stiffness, due to material grading and/or non-uniform shape, are approximated by an equivalent column with piecewise constant geometrical and material properties.