Sentence examples for generator maximum from inspiring English sources

A constant current generator (maximum skin impedance of 2.2 KΩ) generates biphasic rectangular impulses with an electrical mean equal to zero (preventive stimulation protocol: impulse width 250 μS, frequency 60 Hz, maximum intensity 16 mA).

The main function of this implementation is to inject the voltage corresponding to the PV generator Maximum Power Point (MPP) by automatic adjusting its duty cycle.

This laboratory includes a hybrid power system (HPS) integrating wind energy conversion system (WECS), photovoltaic (PV) panel, biodiesel generator, maximum power point tracking (MPPT) controllers and storage battery.

The investigation performed by authors, showed that the producers of the generators usually use B or C characteristic circuit breakers and for large generator sets (greater than 100 kVA) they recommend load split to the value of one fifth of the generator maximum power.

Table 2 Production methods and specific activities (SA) of 90 Y, 111 In, 177 Lu and 213 Bi, both per nmol PP-F11 with 2,049 g/mol   90Y 177Lu 177Lu 213Bi Production route Elution from 90Sr generator Cyclotron 112Cd p,2n 111In Reactor 176Lu(n,γ 177Lu Elution from 225Ac generator Maximum SA (GBq/nmol) 1.8 1.7 0.73 153 Practical SA (MBq/nmol) 400 800 120 400

The total active power loads decreased to 2000 MW/h; the capacity of each gas-fired generator is 100 MW, while the remaining 49 thermal power generators' maximum active power outputs are modified to 50 MW.

In this paper, a variable-speed wind-generator maximum-power-point-tracking (MPPT) based on adaptative neuro-fuzzy inference system (ANFIS) is presented.

For the exemplary sample generator the maximum degree of parallelization is the total number of requested samples.

The generator achieves maximum OCV (open-circuit voltage) up to 2.25 V and CCV (closed-circuit voltage) up to 1.55 V which is 0.276 μW per centimeter square.

The generator's maximum neutron flux at this irradiation position is 2.58 × 107 n/cm2/s ± 5% (approximately 3 × 108 n/s total yield) as measured via activation of small natural indium foils.

Constraints on system components such as the rated power of the generator system, maximum rotational speed, or material degradation can affect the extent to which passive control can enhance performance.