Sentence examples for generates a trigger from inspiring English sources

This unit, implemented in a low noise NIM module to be inserted between the amplifier and the transient recorder, generates a trigger pulse and time information for the digitizer, conditions the amplifier output signals to the digitizer input characteristics, reports the occurrence of pile-ups and prevents collisions between time and event pulses.

The barrel-type trigger counter is placed inside the CDC to generate a trigger signal using 1 mm thick, 300 mm long thin plastic scintillation counters.

In the in-house prototype UWB platform, this is accomplished by generating a trigger control signal from FPGA to the step recovery diode in transmitter [18].

Some of them use the charge pump circuit to accumulate the energy from the RF signal to generate a trigger signal that interrupts the receiver's microprocessor [18 21].

Each channel includes a charge-sensitive preamplifier, a fast CR-RC shaping amplifier followed by a discriminator generating a trigger signal for the readout sequence, and a slow CR-RC shaping amplifier followed by a sample-and-hold circuit for pulse-height analysis.

Each channel included a charge-sensitive preamplifier, a fast CR-RC shaping amplifier followed by a discriminator that generated a trigger signal for the readout sequence, and a slow CR-RC shaping amplifier followed by a sample-and-hold circuit for pulse-height analysis.

The gas pump also generated a trigger signal that enabled synchronised ECG gating of the imaging modalities with the movement of the phantom.

The remaining tracking lock failures caused by blinks and large saccades generate a trigger signal which signals the OCT system to rescan corrupted B-scans.

A custom Visual Basic software generated a trigger for TMS pulse, sent it through an acquisition board (National Instruments 6009), and stored the EMG signals on a personal computer for display and later off-line data analysis.

To generate a trigger signal at the beginning of the first interference fringe for data acquisition, a portion of the reference arm light was directed to a three port circulator and a fiber Bragg grating.

The pressure sensitive piezo film was placed on the writing surface of the tablet and the purpose of the film was simply to indicate the onset of the writing session by generating a triggering pulse (5 V, 0.05 s) sent to one channel of the EMG amplifier.