Sentence examples for generate saw from inspiring English sources

In the case of hybrid poplar, trees can be grown large enough to generate saw timber pieces in less than 15 years.

A bending stator with second harmonics at its double fundamental resonant frequency is designed to generate saw-tooth type displacements under a rectangular pulse.

The nanowires, which have a predominant wurtzite structure, were then mechanically dispersed on the surface of a 128°-rotated Y-cut X-propagating LiNbO3 crystal containing two floating electrode unidirectional transducers designed to generate SAWs at multiple harmonics of the fundamental wavelength λSAW=35μ m.

The phenomenal wealth generated saw urbanisation in the region reach 30%.

The bandwidth of the generated SAW could be further increased by reducing the line-source width but this unavoidably raises the irradiating power density, potentially to a level that may damage the specimen surface.

In the current study, the usable frequency bandwidth of the generated SAW (i.e. those frequency components with sufficient signal-to-noise ratio for reliable measurement) typically spanned from 1 ~25 MHz [ 13], equivalent to a probing depth of 3 ~0.1 mm for wave speed of ~3000 m/s.

In this measurement setup, test samples were placed on a manual Z-stage and the separation between the lens and the sample was finely tuned such that the line-source width was sufficiently narrow in both the temporal (~5 ns) and spatial (~80 μm line width) domains so the generated SAW has a broad frequency spectrum and was thus able to probe multiple layers in the material simultaneously.

These vibrating dot arrays through the Coriolis effect will generate secondary SAW, which is picked up by the SAW sensor.

The algorithm generates a saw tooth-like speed profile which is very common for these kinds of vehicles as there is generally no device installed to keep the vehicle speed constant after acceleration.

Saw dust is actually by-products of sawmills generated by sawing timber.

The forces generated in sawing were also measured to account for the process.