Sentence examples for general range resolution from inspiring English sources

In general, range resolution is determined by the bandwidth of the transmitted signal which is limited by the radar system.

In general, the range resolution is proportional to bandwidth of waveform, and the cross-range resolution is dependent on both the coherent processing interval (CPI) and the target rotational motion from variation of radar viewing angles.

The general equation for ΔR BR as a function of the bistatic angle β and either the monostatic range resolution ΔR MR or the signal bandwidth Δf 0 is defined by the geometry in Figure 6 and can be expressed through [27], Δ R ψ = Δ R MR cos β / 2 cos ψ = c 2 Δ f 0 cos β / 2 cos ψ. (5) Figure 6 Range resolution in (A) bistatic and (B) FSR configurations.

The range resolution is 0.375m.

The range resolution was 150 m.

Figure 9 Ambiguity function showing range resolution.

The range resolution is ρ r  = 0.075.

Table 1 Range resolution of different methods SNR (dB) Range resolution (method in [1]) (m) Range resolution (method in[22]) (m) Range resolution (method in[23]) (m) Range resolution (method in this article) (m) 40 33 32.3 28.7 30.8 20 35 34.5 27.6 28.5 10 N/A N/A 22.8 322.8

Both the range resolution and azimuth resolution are approximately 1 m.

The theoretical range resolution is 2.0 m, and the azimuth resolution is 1.7 m.

Besides, the theoretical range resolution and azimuth resolution are 0.443 and 0.125 m, respectively[16].