Sentence examples for gears must be from inspiring English sources

DUAL-CLUTCH TRANSMISSION: This automated manual gearbox changes ratios without interrupting power to the wheels; gears must be shifted in sequence.

Because the gear errors which are introduced into LTCA model are measured along the line of action, the gear error values of helical gears must be converted to the normal direction as follows: f_{text{pbn}} = f_{text{pt}} cos alpha_{text{t}} cos beta_{text{b}}, (9 where fpbn is the pitch deviation in the direction of line of action.

top speed, fifth gear must be reinstated.

The point of linkage attachment to the steering gear must be placed so that it can move vertically with respect to the wheel mountings without turning the wheels.

To help learn about ratios, students might be presented with several Lego gears and be asked to determine how many times the large gear must be turned for smaller gears to turn once, twice and so forth.

Also, removing such gear in a contaminated environment would raise the risk of becoming a casualty or fatality, and so gear must be removed within toxic-free shelters after following decontamination procedures at the shelter entrance.

There are no surf shops — boards and gear must be rented or bought in Lima — and only a handful of hotels like Luisfer's, a no-frills hostel where surfers bunk up, five to a room.

With conventional USB chips, the PC and add-on gear must be less than 15 feet apart or else the dialogue between microprocessor and peripheral breaks down.

However the output torque is supported by one or two of the gear teeth, and in order to output high torque, the module of the gear must be large or material of the gear need to have high yield strength which generally makes a mechanism heavy such as steel.

Much of the gear must be destroyed after use, so wards need a constant flow of equipment.

Although the FEA figures are lower than the calculated figure (176.21 Nmm−2) the FEA figures confirm that the 8 toothed gear must be manufactured from a metal rather than a polymer to ensure the teeth do not yield under load.