Sentence examples for gear deviation from inspiring English sources

The results indicate that for into mesh lubrication, a suitably small angle inclined to driving gear, deviation of injection position from into mesh side, and larger spray distance improve the lubrication effect.

With out of mesh lubrication, a small angle inclined to driven gear, deviation of injection position from out of mesh side, and smaller spray distance provide the optimal lubrication effect.

On this basis, gear deviations can be mapped into equivalent pinion deviations, added to those of the pinion itself, and cumulatively compensated for by applying corrective machine-tool settings to the pinion.

The experimental results show that it is possible to minimize gear flank deviations, improve tooth contact pattern, reduce vibration of gear pair and decrease surface roughness through implementing ultrasonic lapping of gear.

The short-term components of gear errors, which include profile deviation, helix deviation and pitch deviation, are considered in this section.

Ogawa et al. [11] performed the theoretical and experimental investigations about the dynamic behaviors of a spur gear pair having helix deviation.

The sensitivity matrix of polynomial coefficients is calculated by the normal deviation of the gear tooth surface, and the influence of the variation of polynomial coefficients on the tooth surface is studied.

In addition, based on the values of the pitch deviations, the angular deviations of curve-face gear pair can be worked out, and the results turn out that the measurement method is feasible.

With the coordinate data which were obtained by the gear measuring center, the pitch deviations of the gear pair were obtained.

In the matter of the inspection of the pitch deviations of this gear pair, there is no practical possibility for a reliable metrological traceability to national or international measurement standards can be provided.

As the same as the calculation method of dynamic factor in ISO6336, only the deviations of driving gear are introduced into the LTCA model in this section.