Your English writing platform
Discover LudwigExact(40)
A spherical artificial defect has been machined at the surface of gauge length of fatigue samples.
The test was carried out with gauge length of 20mm, 30mm and 40mm with test speed of 1 mm/min, 5 mm/min and 10 mm/min.
Due to the Weibull nature of the fibers, the fiber strengths at the smaller gauge length of the slip length are stronger; therefore fewer fibers undergo damage.
Damage processes have been characterized on the fracture surface and on the gauge length of the different specimens using scanning electron microscopy (SEM).
Results from differential scanning calorimetry analysis of free volume variations along the gauge length of the creep samples are consistent with results from the X-ray scattering experiments.
The uniformly deformed gauge length of the tension specimen is then sectioned and loaded in a compression split Hopkinson bar with a momentum trap, at essentially the same strain rate as that of the initial tension test.
Similar(20)
The tensile strength at gauge lengths of a few tens of μm was successfully evaluated and a tensile strength as high as 13 GPa was observed experimentally for commercially-available PAN-based carbon fibres, showing their potential high tensile strengths.
Strains in the AFRP were made using electrical-resistance strain gauges with gauge lengths of 5 mm, as shown in Fig. 3b.
Measurements of the strains in the reinforcing bars and concrete were made using electrical-resistance strain gauges with gauge lengths of 5 and 100 mm, respectively, as shown in Fig. 3a.
The strains in the concrete were measured using electrical-resistance strain gauges with gauge lengths of 100 mm, as illustrated above in Fig. 3. Figure 9 shows the load-strain plots for the tested specimens.
The thickness was reduced to 12 mm in the gauge length portion of 200 mm at the centre of the pipe.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com