Sentence examples for gaseous feeds from inspiring English sources

The gaseous feeds of CO2 (0.151/0.399/0.749 mole fraction)+N2 (0.849/0.601/0.251 mol fraction) in the presence of 0.05 and 0.30 mass fractions TBAB aqueous solutions have been studied herein.

In the current work, H2 flux values and coke formation kinetics applying representative gaseous feed mixtures under varying operating conditions are evaluated and modelled.

The results indicate that a substantial degree of separation can be achieved with no other deriving force than the original high pressure of the gaseous feed mixture.

The bounding influence of the gas phase becomes paramount when the gaseous feed is not in excess and the gas solubility and the reaction rate are large.

This is the principal basis for the bounding influence of the gas phase on the rate of absorption when the gaseous feed contains only the reactant and the reaction does not have any gaseous products.

Another feature of the current design is that it is straightforward to recycle both the gas and liquid phases from the separation, using only a single pump, thus ensuring almost complete utilization of the gaseous feed.

Moisture (2000 ppm H2O) addition to the gaseous feed of the CO combustion reaction eliminates the induction period, and the MSA of Au turns to be nearly constant and independent of the Au loadings.

In addition, the experiment results have shown that fabricated catalyst exposed to initial ratios of 45%CO2 45%CH4100%He as gaseous feed components had the highest efficiency and under these experimental conditions, the conversions of 27.9% for CO2 and 33.4% for CH4 were obtained.

Also, plug flow was assumed for the gaseous feed.

In parallel to this, the gaseous feed to the metal oxide has to swing between steam and inert purge gas.

Gaseous mixture fed into the fluidized bed quickly reach its temperature, and then the temperature inside the bubbles reach values of several hundred degrees higher than the temperature of the fluidized bed [14].