Sentence examples for gas plug from inspiring English sources

Using rear sling swivel, pull Gas plug down and twist clockwise until gas plug comes out.

Circling into the marina, I consulted my cheat sheet again: Pull gas plug, slow way down, curve into slip just as engine dies (yes!), grab line on dock and wrap around cleat at stern, climb onto dock with bow line.

conical nozzle at a stagnation pressure of 30 bar and at a distance of 10 mm from the nozzle (extrapolated from Fig. 3). Figure 24 represents a clogged skimmer condition with a high density gas plug formed at the skimmer throat, serving as a secondary expansion point from this higher temperature plug (25 K).

Although CO2 must be generated in the first T-shape mixer, neither bubbles nor gas plug flow was observed in the Teflon tubes.

Slowly withdraw the piston, piston spring, and gas plug.

The components consist of the keg tank, a long liquid dip tube and o-ring, a short gas dip tube and o-ring, one lid and o-ring, a pressure relief valve for the lid, one gas plug (post) with o-ring, one liquid plug (post) with o-ring, and two small poppet valves that fit inside the plugs (posts).

All GAS plugs were treated in lysis buffer containing 50 μg/mL lysozyme at 37°C overnight, extensively washed in washing buffer, and then treated in a solution containing 50 μg/mL protease K at 55°C overnight.

Install the o-rigs on the plugs (posts) if not already installed and place the small poppet valves in the liquid and gas plugs (posts).

Kinetic hydrate inhibitors (KHIs) are used to manage the risk of gas hydrate plug formation in oil and gas transmission pipelines and facilities.

With the existence of stagnant zones, the dust particulates and fly ash coming with flue gas may plug the system and the filtration efficiency decreases remarkably.

As oil/gas subsea fields mature, the amount of water produced increases, which results in an increased risk of gas hydrate plug formation in the flowlines.