Sentence examples for gas injection rate from inspiring English sources

So in the end of all scenarios, the best scenario is as follows: Gas type: associated gas Injection rate: voidage Injection into layers 1, 2 and 3 Time: at the beginning of production.

In the presence of the oil rim, the injected gas spread and promoted a significant lateral deviation error; a single direction of penetration would have been more deleterious and would have reduced the gas injection rate and amount of gas injected to nearby wells, and it would have affected the diffusion velocity of gas in the water.

The long slim-tube displacement experiments were performed at a constant gas injection rate of 0.167 cm3/min until 1.2 PV of hydrocarbon gas was injected.

A much higher gas injection rate and delayed increasing production rate (Fig. 32) indicate the higher injectivity and better efficiency for the novel foam.

At the given range of gas injection rate, the critical light oil rate will increase with the increase in gas injection rate, at approximately 20 40 m3/day.

The inert gas injection rate, 23 kg/s is more appropriate at this accident.

The inert gas injection rates are 23 kg/s, 36 kg/s, 48 kg/s, respectively.

Several cases with change of water and gas injection rates were calculated.

Figure 7 shows that the light oil rate will reach a critical value at different gas injection rates.

1. CO2 sequestration at higher gas injection rates with simultaneous heat harvesting and dynamic control over the gas plume might further increase revenue.

Open image in new window Fig. 3 Calculated wellhead pressure and computational time based on compositional model and ThPCA at different gas injection rates.