Sentence examples for gas ideality factor from inspiring English sources

In the presence of methane gas, ideality factor of the Pd Ag/n-ZnO Schottky junction follows the same nature yet having lower value comPd Ag/n-ZnOat meaSchottky nitrogen (η = 1.52 in N2 and η = 1.18 in N2 +CH4 at 200 °C).

For an ideal diode, the diode ideality factor should be nearly equal to unity.

A Ni/Au (10/10 nm) electrode with an average sputtering rate of about 1.0 nm/min was prepared by radiofrequency (RF) sputtering in Ar (30 sccm) gas atmosphere under a pressure of 0.14 Pa and a power of 10 W. The SBH (ideality factor) of the TiN and Ni diode is around 0.59 eV (1.07) and 0.87 eV (1.23), respectively.

The diode ideality factor n indicates how closely the diode follows the ideal diode equation (Archer and Hill 2001).

The most fascinating inspection of this report is the modulation of the electrical properties of the junction like ideality factor, series resistance, saturation current, and barrier height in the presence of the reducing gas like methane with proper justification and thus supports the use of Pd Ag/n-ZnO schottky junction for efficient detection of gases containing hydrogen molecule.

Considering that higher trap density increases the ideality factor45, the ideality factor variation follows the trend of trap density variation (see Figs 2(d) and 3(c)).

(d) Gate-voltage-dependent ideality factor of the pentacene/MoS2 p-n junction device.

The barrier height and ideality factor was also determined.

The ideality factor of the diodes improved at elevated temperatures.

The ideality factor of our device was between 2.2 and 22.2, which is much higher than the typical value of the ideality factor (between 1 and 2) observed for conventional p-n semiconductor junctions42.

A large ideality factor value is a common feature of vdW heterostructure devices that results from the trap state17,18,19.