Sentence examples for gas cleaning processes from inspiring English sources

Sulphuric acid aerosols can be formed in wet flue gas cleaning processes by spontaneous condensation initiated mainly by homogeneous nucleation.

This approach was used to compare two flue gas cleaning processes: the typical wet-type process and the new transported droplets column process.

The development of a combustor, designed to burn raw producer gas that is not subjected to conventional gas cleaning processes, is presented.

This paper describes a new simulation tool for the prediction of aerosol formation and behaviour in gas liquid contact devices such as absorbers, scrubbers, quench coolers, and condensers as well as multistage gas cleaning processes, respectively.

NP and UFP composition was essentially in accordance with the most important fuel and combustion process characteristics: in particular, the presence of chlorides and metal species was consistent with the respective waste feed content and their expected behavior during combustion and flue gas cleaning processes.

Process design and scale-up require a fundamental understanding of the hydrodynamics of gas solid flow in the circulating fluidized bed flue gas desulfurization (CFB-FGD) reactor although the CFB system has been widely used in flue gas desulfurization and flue gas cleaning processes.

Therefore, investment and running costs for the gas cleaning process are reduced without any loss of separation efficiency.

This compact apparatus incorporates several of the steps of a conventional exhaust gas cleaning process, such as dust separation, quench, acid and basic wet cleaning.

Wet wood is fed to the fixed bed downdraft gasifier and gaseous fuel is produced then after the gas cleaning process can be used by high temperature SOFCs.

Considering these factors, the reliability of gas cleaning process at reasonable costs appears to be the biggest challenge for the commercialisation of the gasification technologies.

For example, failure of particulate capturing operation could have instant effect on downstream turbine, catalytic membrane, fuel cell and CO2 separation, therefore hot filtration is considered as the most critical process step in the gas cleaning process.