Sentence examples for g of acid from inspiring English sources

In the current study, 0.1 g of acid washed pyrite was added to lipid solution (20 ml).

The same extraction procedure was carried out with 0.7 g of acid treated shrimp waste or 0.6 g of raw shrimp shell waste using 15 mL of acetone, EtOAc and acetone:EtOAc (1 1) mixture as solvents.

The typical reaction experiment is briefly described as follows: 20 g of corncob powder were mixed with 100 ml of distilled water; subsequently 0.5 g of acid modified zeolite was added into the mixture.

The steam explosion reactor was pre-warmed to pretreatment temperature (150°C) and then loaded with 750 g of acid impregnated corn stover (approximately 45% solids).

The fat solubilised in hexane was applied to a glass column, prewashed with hexane, filled (from the bottom to top) with 5 g of acid silica (40%H2SO44 w/w), 1 g of deactivated alumina, and 1 g of Na2SO4.

Subsequently, 3 g of acid-washed pyrite is added to the vessel while the vessel is kept under a N2 atmosphere.

Then, depending on the quantity proposed, 25 g of acid-treated kaolinite aluminosilicate powder mixed with a quantity of prepared coir dust was added slowly into the continuously stirred Ag-TiO2 colloidal solution.

In this procedure, 11.52 g of acid-treated TW was mixed into 200 mL solution containing dissolved ferric (III) chloride (FeCl3) (0.05 mol i.e. 8.11 g) and manganese (II) chloride (MnCl2) (0.025 mol i.e. 3.146 g) at room temperature.

Aliquot of the filtrate (250 µl) was transferred into a sterile screw-cap Eppendorf tube containing 0.3 g of acid-washed glass beads (≤106 µm, Sigma, Saint-Quentin Fallavier, France) and shaken to achieve mechanical lysis in a FastPrep BIO 101 apparatus (Qbiogene, Strasbourg, France) at level 6.5 (full speed) for 90 s.

In brief, fungal growth (approximately 2 5 mm) was suspended in 0.5 ml of DNA extraction buffer (10 mM Tris-HCl Ph 7.5; 1% SDS; 100 mM EDTA; 2% TritoN X 100, and 100 mM NaCl) containing 2 g of acid-washed glass beads.

The NREL Digester was pre-heated to pretreatment temperature and then was loaded with 500.0 g of acid-impregnated and pressed feedstock and quickly heated (~5 to 10 sec) via direct steam injection to reaction temperature.