Sentence examples for functioning of the control system from inspiring English sources

The obtained test results confirmed the beneficial effects of the cooling system used on mean weighted skin temperature, the physical parameters of the microclimate under the clothing, and the participants' subjective assessments, as well as confirmed that the functioning of the control system regulating liquid temperature in the LCG was correct.

The simulator mirrors the functioning of the control system and the dynamics of the indoor environment, where the thermal model of the simulator was developed in the Dymola/Modelica environment, while the illuminance model was developed and parameterized as a black-box model on the basis of measurements in the Matlab environment.

The solution approach consists in choosing the controller parameters in order for the Lie algebra generated by the closed-loop DTSS-matrices to be solvable, as this property guarantees the existence of a common Lyapunov function for the control system.

However, the erroneous function of the control system can be detected and recovered.

The torque transfer function of the control system is derived from the dynamic equations of the drive system.

We then sought to optimize the function of the control system, the cultural conditions and the data acquisition system and carried out an experiment on the spacecraft SHENZHOU-II.

Active safety system can automatically adjust the control strategy according to changing of road surfaces with respect to the friction properties, and which can maximize the function of the control system.

As the design of feed-forward control of the radiated sound power and of feedback control of the vibration velocity or volume velocity is limited by the properties of the secondary control path (an open-loop frequency response function), the performance of the control system may be deteriorated if a controller optimally designed for one radiation environment is used for a different environment.

In order to have optimal functioning of particle accelerators, the control system requires a precise position monitoring of the beam and the performance of the concerning data acquisition system should be evaluated accurately.

The problem of the design of the control system functions for automated manufacturing lines is addressed.

In addition, a closed-form of transfer function representation that facilitates frequency analysis of the control system is provided to give further insight into the proposed method.