Sentence examples for function of fluid from inspiring English sources
In the laboratory and direct numerical simulation (DNS), the Reynolds number is based on the molecular viscosity, which is a function of fluid property (MacCall et al. 2015).
The amount of geothermal energy extractable from a hydrothermal reservoir is a function of fluid properties such as temperature and mineralization, but achievable flow rates are crucial.
The concept of stability map was first used by Poloski et al. (2009a, b) to represent deposition velocity as a function of fluid rheology.
The valveless piezoelectric pump has both the actuator function of fluid transfer and the sensor function, which can obtain the angular velocity variation when its attitude changes.
Similarly, Eq. (7) is of form shown in Eq. (4) where tau = left( {frac{1}{{2pi h{r_{text{r}}}^{2} }}} right)T = k_{2}^{primeprime} T (9)and dot{gamma } = frac{2 }{n}omega = k_{2}^{prime } omega (10) (k_{2}^{prime prime }) is a function of fluid rheology and system geometry but (k_{2}^{prime }) is a function of fluid rheology only.
The model describes the relationship between porosity and stresses, and estimates reservoir compaction as a function of fluid withdrawal, time, and stresses.
These parameters are functions of fluid bed operating conditions, coal and sorbent properties and the stoichiometric air ratio.
Comparative analyses indicate that the frequency-dependent attenuation and the seismic behaviors are functions of fluid viscosity associated with hydrocarbon saturations.
At time (left( t right)), the cash flow (CF_{t}) is given by CF_{t} = R_{t} - E_{t} (8 where (E_{t}) and (R_{t}) stand for operating expenses and revenue, respectively, which are functions of fluid production volumes at time (left( t right)): R_{t} = p_{o} Q_{t}^{o} + p_{g} Q_{t}^{g}.
In general, resistivity is controlled by the combined factors of connectivity of fluids (a function of porosity), fluid properties (salinity, temperature), surface conductivity of clay minerals, and capacitive behavior due to the presence of clay minerals and sulfide particles (Wong 1979; Revil et al. 1998, 2015a; Zisser et al. 2010).
Modelling of these process requires relative permeability (kr) of each fluid as a function of the fluid saturation.
