As most of the catalysts remained at the bottom of the bed, the volume fraction of the catalyst in Case 1 was lower than that in Case 2. For heavy oil catalytic systems, it would be better if oil gas can be fully mixed with the catalyst within the bottom mixing zone, but without back-mixing to avoid overcracking of the intermediate products after leaving the catalyst bed.
Mix around, but not too much, so the yokes break but don't fully mix with the whites.
"Of course, neither was fully mixed into the Gulf," Mearns noted, but the opportunity for dilution in so vast a body of water was nonetheless great.
Combustion only happens when fuel and air are fully mixed in the chamber before they ignite.
Because the two solutions are confined to the microfluidic chamber, they don't fully mix but remain layered.
The flue gas stream containing SO2 is mixed with the H2S feeding gas separated from the syngas stream, which should be fully mixed in the flue gas stream.
At first, the active material, carbon black and carboxymethylcellulose sodium (CMC) binder were fully mixed in a ratio of 70 20 10 (wt%) to form a slurry.
The released water, if fully mixed with the flame front, can greatly reduce the explosion intensity by acting as heat sinker and flame retardant.
The bilayer film fully mixed together to become a composite single layer and has good interfacial property after annealing at 773 K.
The materials were fully mixed by ball-milling for 2 h using stoichiometric amounts of LiCrxNi0.5−0.5xMn1.5−0.5xO3.95F0.05 (x = 0.025, 0.05, 0.075), and the dry mixture was heated at 400 °C in air for 5 h.
