Volumetric measurements had reproducibility of ∼0.005% of nominal full-scale sample cell chamber volume; and the shrinkage measurements did not exceed the average relative standard deviation (RSD) of ∼2.8%, which is ∼4 times better when compared with conventional techniques.
Based on the thermal characteristics of the early-opening conductive heated pavement system and the experimental thermal conductivity results for the protective concrete, heat transfer analysis was performed on a full-scale sample; here, the separation distance between the copper plates in the base concrete layer (1000, 1250, and 1500 mm) was used as a variable.
Polygon mesh generated from the full-scale sample describes the real surfaces rather than the volume, and these surfaces may be of any shape.
To obtain the development of non-uniform shrinkage through the thickness of full-scale slab samples, three small-scale solid concrete samples with their bottom surfaces sealed with epoxy were prepared and monitored over time.
However, the aim of this part of SVQ was to test the feasibility and robustness of the elicitation methods; and, rather than conduct a full-scale national sample survey, the sample was restricted to 400 people which was not representative of the population.
For this purpose, three full-scale slab samples were cast on steel-bars truss decks, adopting RCA replacement ratio of 0%, 50 % and 100, respectively.
The converter consumes 100 mA out of a 3.3 V supply including the reference circuitry, analog cells, and all digital blocks at full-scale Nyquist sampling speed.
The full-scale bioreactors sampled in the study were located at three cities in Netherlands, Apeldoorn, Olburgen, and Rotterdam, and were named A, N, and R, respectively.
Nevertheless, biomass concentrations of about 5 g/L at the time of nutrient depletion allowed for repeated full-scale 'omics sampling around and after transition phase, sufficient for studying metabolic switching events at a high time resolution.
