There was also a quarter-scale clay model of a vehicle that seemed to be from the 1930s and full-scale wall drawings.
Full-scale wall specimens were prepared and tested under transverse bending, compression and shear.
In the second stage full-scale wall specimens were tested (5 monotonic and 5 cyclic tests).
The tests were carried out on three groups of full-scale wall panels with different areas of openings.
The numerical tool achieves good compliances to the benchmarking cases of the HAMSTAD project, and its predictions have shown good agreement with data from the full-scale wall experiment.
Static lateral load tests were conducted on a total of thirteen full-scale wall panel specimens to investigate the performance of CFS walls utilizing primarily the construction details used in Turkey.
Therefore an experimental study was conducted to investigate the local and overall buckling behaviour of the studs in these frames using a total of 40 full-scale wall frame tests and stub column tests.
Static measurements were made during a destructive test on a full-scale wall, in which an in-plane cyclic force was imposed by a hydraulic jack until its collapse.
Six full-scale wall assembles, consisting of a clay masonry panel, two confining columns and a tie beam, were tested under a combination of vertical load and monotonic pushover up to failure.
An experimental study was carried out on three full-scale wall specimens upgraded with various schemes to improve the seismic behavior of shear-type damage of lightly RC walls.
The full-scale walls were subjected to lateral loading in order to establish their lateral resistance.
