Sentence examples for fuel conversion ratio from inspiring English sources
A stand-alone ASU generating 95% pure O2 has been used in all seven cases, followed by an O2-blown entrained flow shell gasifier operating at 30 atm, and fuel conversion ratio of 99.9%.
An opposite relation was determined between the specific NOX emissions and the Fuel-N conversion ratio obtained between the N-rich and the N-lean fuels tested here.
In general, a higher proportion of air increased the specific NOX emissions and the Fuel-N conversion ratio.
Results show that burning biomass separately produces higher NO emissions and a higher fuel nitrogen conversion ratio than burning coal without biomass addition due to the higher volatile matter content of the biomass; the fuel nitrogen conversion ratio is in agreement with the H/N ratio in the fuel under both air and oxy-fuel atmosphere.
Finally, the influence of the pressure and temperature ratios on the overall plant efficiency and the fuel conversion rate is discussed.
The feed conversion ratio was 1.36±0.2.
The method is applied to explore the specific issue of the features of the fuel cycle parameters related to fast reactors with different fuel types, different conversion ratios (CR) and different ratios of Pu over minor actinide (Pu/MA) in the fuel feed.
We have already clarified that moisture in coal causes low combustion efficiency and a high conversion ratio of fuel nitrogen to NOx compared with a coal having the same fuel ratio with little moisture, in pulverized coal combustion.
Interconnected issues like fuel type, minor actinide content, conversion ratio values, etc. need to be understood and their impact quantified.
The conceptual designing of reduced-moderation water reactors, i.e. advanced water-cooled reactors using plutonium mixed-oxide fuel with high conversion ratios more than 1.0 and negative void reactivity coefficients, has been carried out.
Tight-lattice is widely adopted in the innovative reactor fuel bundles design since it can increase the conversion ratio and improve the heat transfer between fuel bundles and coolant.
