Sentence examples for front of the tool from inspiring English sources

Higher tool speed was accompanied by an increase in soil stress in front of the tool.

However, no shearing plane forms in front of the tool edge and the materials are still removed by extruding.

For all the three cases, the machined chip accumulates in front of the tool rake face as the tool advances.

When the cutting direction is {100}<001>, no shearing plane is formed in front of the tool edge.

Chips accumulate in front of the tool and stick to the workpiece depending on the length of the cutting time.

Therefore, large part of material flow up in front of the tool edge and small part of material flow to the side of the tool edge.

One tool that gets prominent, front-of-the-book placement is a compact stethoscope for mechanics, at $26.95.

Contrarily, when HPPT is difficult to occur, high shear stress in silicon in front of the diamond tool is caused by the tool extrusion.

In nano-cutting process, Fang et al. [16, 17] propose that the materials are extruded in front of the cutting tool when the UCT is much less than tool edge radius.

In the cutting process, atoms in the separation layer are trapped by the cutting tool edge forming a small red triangular region in front of the cutting tool edge, as shown in Fig. 11b.

With the progress of cutting process, large amount of partial dislocations emits from top free surface in front of the cutting tool, which leads to considerable chips formed along the rake face of cutting tool, as shown in Fig. 4f.