Sentence examples for front distance from inspiring English sources

The longer the wetting front distance, the smaller the calculated errors.

The maximum velocity of the landslide with erosion is higher than that without erosion, and leads to a longer distance of movement, an increased front distance from the origin.

Table 2 Calibration parameters of car following model Wiedemann'99 in VISSIM No. Code Name Description† Default value Used value 1 CC0 Standstill distance (m) It is the desired back bumper to front distance between vehicles in the stationary condition 1.5 0.30 2 CC1 Headway time (s) It is the desired time headway in seconds.

The leading front distance was defined as the point at which two of the most distantly migrating cancer cells were simultaneously in focus in one field under × 200 magnification.

The conditional mean of the progress variable conditioned on distance Δ from the GMLI, < c | Δ >, and the PDF of the GMLI-to-flame-front distance, Δf, are used to quantify the effects of the critical parameters on the interactions of the turbulent premixed flame with the counterflowing hot combustion products, both in the experiments and in the simulations.

Turbulent rich iso-octane-air flames (φ = 1.4) exhibited areas of quench in the flame front, the distance between areas of quench was shown to increase as the turbulence intensity was raised.

This difference in the front edge distance was expected to create small behavioral difference because of the anchor shear reinforcement placed near the test anchors.

With this configuration, one anchor would have a front edge distance of 138 mm [5.4 in.] while the other 167 mm [6.6 in.], as shown in Fig. 3.

On the resulted binary images, a morphology function able to evaluate the mean radius of the flame front as distance between the combustion chamber center and the outline of the flame was applied.

The front has distanced itself from the military wing of the coalition, headed by Selim Idriss, a defected brigadier, but also from ISIS.But Western policymakers are unsure how to relate to the front.

In this paper, a 200-mTorr Ar pressure is high enough to form the shock front, and distances of 25 mm and 30 mm may be a region of the shock front.