Sentence examples similar to friction-modified from inspiring English sources
However, studies on the nonlinear friction behavior of modified wood products are very limited.
The new modified friction model facilitates production of continuous derivatives and maintenance of all the GMS model friction properties.
The friction between polymer brush-modified surfaces and bacteria attached to a cantilever showed that friction was correlated to the amount of bacteria adhering to the surface, suggesting that friction forces play a role in attachment (Swartjes et al. 2014b).
Fig. 4 a Friction coefficients of surface-modified ZrP nanoplatelets without and with intercalations (C16-ZrP and C16-ZrP-N12 C16-ZrP-N12 C16-ZrP-N12a load of 80 N and rotatinn speed of 350 rpmineral
The contrast difference between the modified and virgin regions of the surface is enhanced relative to the images shown in Figure 3, confirming that the highly polar NTA functional groups provide an additional increase in the coefficient of friction measured for the modified regions of the surface as expected.
Considering the clearance in joints, the contact model is performed using a nonlinear continuous contact force model and the friction effect is considered using modified Coulomb friction model.
In the modified code, the wall friction in a vertical tube is calculated using the two-phase friction factor correlation proposed by Collier and the interfacial friction factor is calculated using the empirical power-law relationship of Choi.
The surface-modified layer showed good friction-reducing and fair anti-wear abilities.
A high goodness of fitting (R2, 0.9987) can be achieved when used the modified model to calculate friction pressure loss based on Hagen-Poiseuille equation.
Ewy (1999) proposed the modified Lade criterion by modifying the criterion of Lade and Duncan where only two rock strength parameters are required, cohesion and friction angle (Zoback 2007).
The sliding friction and wear behaviour of 15Cr 15Ni 2Mo titanium-modified austenitic stainless steel (alloy D9) was studied in high purity liquid sodium at high temperature viz.
