Sentence examples for friction relative from inspiring English sources
For the friction relative to the output force is small, so it is ignored in this paper.
The temperature rise was high and shown to be directly linked to load, coefficient of friction and relative velocity.
In the present paper we describe the procedures used for performing fretting wear tests on coated systems, and for the characterisation of coefficient of friction and relative thickness evolution in low friction coatings during fretting wear.
Furthermore, boundary wall effects were found to be dependent on the stacked pellet shape and orientation, and did not necessarily lead to an increase of viscous friction loss, relative to the infinitely wide systems, for the column-to-particle diameter ratios, lower than 10, which is contradictory to non-mechanistic relationship models.
A "Who Gets What" list of personal items can also lessen stress for the senior and future friction among relatives.
The presence of reverse L-shaped rib shows a significant effect on heat transfer and friction factor characteristics, relative to change in relative roughness pitch (P/e) and Reynolds number (Re).
Using the Taguchi method, 18 kinds of frictional lining specimens were prepared in order to investigate their performance in judder resistance and establish a relationship between judder behavior and the Ts/Td (Ts: static torque; Td: dynamic torque) and dμ/dVx (μ: friction coefficient; Vx: relative sliding velocity of frictional lining and clutch drum) parameters.
Damping force is usually described by the relative friction coefficient φ, which is defined as the ratio of the frictional force F to the vertical force P of the suspension system: varphi = frac{F}{P} = frac{{2F_{mu } }}{P}, (3)where P is the sum of the vertical spring force on each end of the bolster, including the side-frame end coil springs and the lever end coil springs.
Similarly low relative friction coefficients were obtained in nanoprobe measurements.
It also has good lubrication property and its friction coefficient is relative low.
Energy is dissipated by nonlinear friction forces when relative motions between the ring damper and the blisk take place.
