Your English writing platform
Discover LudwigSuggestions(1)
Exact(5)
The forcing frequency is set at a fixed value, in the range 15 120% of the natural shedding frequency of the stationary normal flat plate.
The sampling frequency is set at 2000 Hz.
In addition, cut-off frequency is set at the middle of frequency space (i.e., 0.5 for normalized frequency space).
The standard transducer frequency is set at 7.5 MHz.
As it is possible to observe in Figure 2, the measured signal (measurement electrode) is fed to an instrumentation amplifier that subtracts from the signal a low-pass version of the same signal (the low-pass cut-off frequency is set at 0.1 Hz).
Similar(55)
The frequency was set at 8 MHz and depth at 4 cm.
The modulation frequency was set at 1 kHz and the duty cycle was changed from 20% to CW operation.
To do this the reverse water pressure was 0.05 MPa, the speed transducer frequency was set at 30 Hz and the feed density was 20 g/l.
At initial programming, frequency was set at 60Hz with a pulse width of 240 μs.
The scanning frequency was set at 0.5 Hz, and the image size was 5 × 5 μm2.
Sampling frequency was set at 50 Hz for all the tests.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com